B R I T L I S T
                          **************************
                              By  H. Clayworth.


                 BRITLIST is a complimentry program to BRITMAP
             .....................................................


  The BRITLIST DATA contains names of places with the country origin, plus degrees and
  seconds  parameters, first for the NORTH, and then for EAST or WEST.

  PREPARE SIDE 'A' OF THE NEW DISC.
 -----------------------------------

  To get the program working FORMAT a blank disc in Drive A: with DISCKIT.
  The next operation is done better with the M: drive 'EMPTY'. So ERASE all the contents
  from Drive M: by Typing ERASE when asked for a filename Type M:*.*

  With your copy CP/M disc in drive A:  Type:- PIP  when the * appears Type in the
  following files.

  * M:=A:J14CPM3.EMS [RETURN]
  * M:=A:SUBMIT.COM  [RETURN]
  * M:=A:PROFILE.SUB [RETURN]
  * M:=A:PIP.COM     [RETURN]

  Take your copy CP/M disc out of the drive, and replace it with the BRITLIST disc
  side 'A' facing the screen and Type at the * :-

  * M:=A:*.BAS [RETURN]

  These are the DATA MODULES. i.e. A.BAS to Z.BAS, when these have copied to drive M:
  Take your BRITLIST  disc out of the drive, and replace it with your FORMATTED disc
  with the A side facing the screen, then Type at the * :-

  * A:=M:*.* [RETURN]

  This will transfer all the files from M: drive to the disc in the A: drive.
  Press ALT(C) to exit from PIP. Take your NEW disc out of the drive and replace it
  with your CP/M copy disc.

  PREPARING PROFILE.SUB
 ------------------------

  RUN CP/M. and at the A> prompt Type:- BASIC RPED. When the menu appears on the screen
  take your CP/M copy disc out of the drive and replace it with your NEW disc with the
  'A' side facing the screen.
  Press [F1]  when the next screen appears, with the prompt for the filename for the
  source disc type inside the box PROFILE.SUB and press [RETURN]. When the destination
  filename (PROFILE.SUB) appears Press [RETURN], the screen will clear and then you will
  be presented with the contents of PROFILE.SUB. Clear all the existing data out one
  line at a time by Pressing CUT, then Type in starting from the top :-

  pip

<M:=A.BAS
<M:=B.BAS
<M:=C.BAS


Do this up to

<M:=Z.BAS (Then finish with):-
<

  Press [EXIT]   When the menu  re-appears Press [EXIT] to Quit RPED.
  YOUR 'A' side is now complete.


  PREPARE SIDE 'B' OF THE NEW DISC
 -----------------------------------
  Clear out the M: drive once again.
  With your CP/M copy disc in drive A: Type:- PIP  when the * appears Type:-

  * M:=A:BASIC.COM  [RETURN]

  Take your CP/M copy disc out of the drive and replace it with your BRITLIST disc
  with side 'B' facing the screen at the * Type:-

  * M:=A:*.* [RETURN]

  Take the BRITLIST disc out of the drive and replace it with your NEW disc with side
  'B' facing the screen and Type:-

   *A:=M:*.* [RETURN]

   When these files have copied to your NEW disc, the disc is now complete.
   Press ALT(C) to exit out of PIP.

   You can now turn your NEW disc over to the 'A' side, and Press SHIFT+EXTRA and EXIT
   The disc will auto boot and load all the DATA MODULES into drive M:, when this has
   finished turn the disc over to side 'B' and Type:- BASIC

   When BASIC has loaded in, Type RUN "BM4     then press [RETURN]. When the BRITMAP
   Menu appears on screen  Option 5. selects  BRITLIST. A menu will appear, just press
   the letter of your choice and the DATA will be shown, follow on-screen instructions.


   HAVE FUN........
 just press